• Connect the speaker to the power supply using the microUSB cable supplied with the device (Power adapter not included. We recommend using a poweradapter with the following specifications: 5 V, max. 1.0 A, for example ELARI PowerPort.) The LED will light. When charging concludes the LED will turn off.
  • Turn on the device: press and hold power button until you hear a beep. At the same time, the indicators will flash blue. Open the Bluetooth settings menu on your device and search for devices. Select “ELARI NanoBeat” from the list of found Bluetooth devices. If the connection is successful you will hear the voice message “NanoBeat connected”, and the LED indicators will turn blue. To play music, open the music application on your Bluetooth device, while the coloured LEDs will continue to flash. To start play/pause/receive a phone call/stop a phone call, press the button once. Turn off the speakers by pressing power button for 2 seconds.